Application as a soil and irrigation water acidifier
To
bring the pH of the fertigating solution to a final pH of 5.5-6, we will
use 1-1.5 l/ha of NITROACID in all irrigations.
Application as an unclog for irrigation installations
To eliminate strong blockages in the irrigation
system and drippers, we will lower the pH of the solution with
NITRIOACID to extreme values of 1-3. The application will be done
at low pressure, suspending irrigation once we have introduced
the appropriate volume. We will let it act for half an hour and then
we will inject water under pressure to clean the circuit. As a guide,
since it depends on the hardness of the water and the types and
doses of fertilizers used, the following are recommended:
- In cases of irrigation solutions with a high risk of precipitation and
obstructions, the continuous application of 200 c.c. of NITROACID
/m3 of irrigation water. 3 l of NITROACID /m3 flow can be used
daily for half an hour.
- In cases of irrigation solutions with little risk of precipitation and
obstructions, the continuous use of 3-5 c.c. of NITROACID /m3 of
irrigation water. 3 l of NITROACID /m3 of flow can be added
monthly for half an hour.